3M 8001 Static Control Surface Mark Remover 946ml Anti-Static Mat Cleaner for ESD Workbench Surfaces

Product Overview

3M 8001 946ml is a static control surface cleaner and mark remover, commonly listed as 3M™ 8001 Static Control Surface Mark Remover or 3M™ 8001 Cleaner for Static Control Mats. It is designed to remove ordinary dirt, grime, difficult spots and stains from static control surfaces such as table mats, floor mats, hard laminate benchtops and portable field service kit work surfaces. 3M’s Chinese SDS identifies the product as Cleaner 8001 and lists its recommended use as an extra-strength fluid for cleaning static control surfaces and hard surfaces.

This product is a clear, colorless, water-based liquid that can be used full strength. It requires no rinsing and leaves no tacky or corrosive residue that could attract dirt, attack delicate parts or increase the contact resistance of the surface.

Key Features

• Extra-strength cleaner for static control surfaces
• Removes ordinary dirt, grime, difficult spots and stains
• Suitable for washable static control surfaces
• Clear, colorless, water-based formula
• Ready-to-use full-strength liquid
• No dilution required
• No rinsing required
• No chlorides or sulfides
• Nonflammable / no flash point
• Leaves no tacky or corrosive residue
• Helps maintain static control surface performance
• Common package: 32 oz trigger spray bottle, approximately 946ml

Typical Applications

3M 8001 946ml is suitable for routine cleaning and maintenance in electronics manufacturing, ESD protected areas, laboratories, repair workstations and industrial workbench environments.

Typical applications include:

• Cleaning ESD table mats
• Cleaning static control floor mats
• Cleaning hard laminate benchtops
• Cleaning electronics assembly workbenches
• Cleaning portable field service kit work surfaces
• Removing marks and stains from static control areas
• Surface maintenance in electronics component assembly areas
• Cleaning industrial workbenches, test benches and repair benches
• Cleaning hard surfaces where tacky or corrosive residue should be avoided

Product literature specifically lists table mats, floor mats, hard laminate benchtops and portable field service kit work surfaces as suitable static control surfaces.

Storage Recommendations

• Keep the product in its original sealed container.
• Close the cap tightly after use.
• Store in a cool, dry and well-ventilated warehouse area.
• Avoid direct sunlight and heat sources.
• Store away from acids.
• Keep away from areas where food or pharmaceuticals may be present.
• Manage inventory according to the first-in, first-out principle.
• Before use, check the bottle, label, trigger sprayer and expiration condition to ensure there is no leakage, damage or contamination.

Handling and Use Recommendations

• Confirm that the surface is suitable for cleaning with a water-based cleaner before use.
• Spray directly onto the static control surface and wipe with a clean cloth or sponge.
• For difficult spots or stains, light agitation with a sponge, brush or suitable scrub pad may be helpful.
• Avoid breathing vapor, mist or spray.
• Avoid contact with eyes, skin and clothing.
• Do not eat, drink or smoke while using the product, and wash thoroughly after handling.
• Use protective gloves, eye protection or face protection as needed.
• Avoid release to the environment.
• Keep away from reactive metals such as aluminum and zinc to avoid the formation of potentially explosive hydrogen gas.